iso 9001  
 
 

INDUSTRIAL GRADES

 
 

CONVENTIONAL GREASES

HIGH PERFORMANCE GREASES

GEAR AND ROPE COMPOUNDS

LUBRICATING OILS

 
     
     
 

HIGH PERFORMANCE GREASES :

 
 
SUNOL HITEC PD GREASE -

SUNOL Hitec PD grease is a high performance grease incorporating high dosage of microflux surface improvement additives and is designed for maximum wear applications at low speeds to very high speeds. It has excellent shear stability and very good resitance to oxidation, rust and water washout. It can be used in anti friction and roller bearings working at high loads, high speeds and under shock loads or vibrating conditions. It can also be used in worn out gear boxes and worm gears.

NLGI GRADE

00

0

1

2

3

Four Ball Weld Load, Kg.

250

250

250

250

250

Worked Penetration,@25°C,(60 X)

400 – 430

350 – 380

310 – 340

265 – 295

220 – 250

Drop Point ° C, Min.

180

180

190

190

190

Emcor Antirust Test

‘00’

‘00’

‘00’

‘00’

‘00’

SUNOL LITHEX LL EP GREASE -

SUNOL Lithex LL EP is a multifunctional lithium grease with microflux surface improvement additives for lubrication under severe mechanical conditions and for extension of lubrication frequency. Use of this grease results in significant reduction in wear and co-efficient of friction due to plastic deformation of mating surfaces. This grease is suitable for all types of bearing operating under shcok loads, heavy loads or under excessively wet and damp conditions. Can also be used in universal joints and spline shafts working under heavy torque.

GRADE

LL-1

LL-2

LL-3

LL EP 2

LL EP 3

Four Ball Weld Load, Kg.

250

250

250

315

315

Worked Penetration,@25°C,(60 X)

310- 340

265-295

220-250

265-295

220-250

Drop Point ° C, Min.

180

180

185

180

185

Emcor Antirust Test

‘00’

‘00’

‘00’

‘00’

‘00’

SUNOL SPONGE GREASE ‘O’ -

SUNOL Sponge Grease ‘0’ is a lithium complex soap base grease designed for lubrication of open gears operating in adverse conditions. Usage of superior variety of additives ensures extended life of open gears subject to moderately high loads, shock loads and extreme ambient temperatures. This grease is recommended for use in all types of medium to small open gears on Kilns, Mills, Mixers etc.

GRADE

GREASE ‘O’

Four Ball Weld Load, Kg.

340 min

Worked Penetration,@25°C,(60 X)

370 ± 10

Drop Point ° C, Min.

200

FZG Failure Stage

>12

SUNOL LITHEX H3M (HIGH TEMERATURE GREASE WITH MOLY) -

SUNOL Lithex H3M is a high temperature grease fortified with MoS2 additives and it is recommended for High temperature and heavy duty applications.

 
     
     
 

GEAR & ROPE COMPOUNDS

 
 
MILL ROLL BEARING OIL (SUNOL GEARTEX ) -

SUNOL Geartex grades are dark coloured high viscosity oils made from selected base stocks and contain non-toxic mild EP additives. These grades provide very good resistance to leakage and wear and tear and are recommended for use in heavily loaded, slow speed, mill-roll bearings in sugar mills, steel plants and cement plants.

GRADE

102

103

104

106

Kinematic Viscosity @100°C,cst

38 – 45 

60 – 68

80 – 88

100 – 120

Timken Ok Load, Min.

14 Kg.

14 Kg.

14 Kg.

14 Kg.

Flash Point (COC)°C,Min.

200

220

230

230

Pour Point °C, Max.

6

6

9

9

OPEN GEAR COMPOUND (SUNOL TGC ) -

SUNOL TGC Grades are black lubricants for open gears, wire ropes and chain lubrication. They have excellent thermal and chemical stability and have very good adhesiveness due to use of selected bituminous component. These grades are recommended to be used primarily in open gears of small presses to big gears of cement plants. They are used in kilns of cement plants and some sponge industries.

GRADE

74

79

85

89

Kinematic Viscosity @100°C,cst

80 – 120

210 – 240

410 – 540

710 – 760

Timken Ok Load, Min.

15 Kg.

15 Kg.

15 Kg.

15 Kg.

Flash Point (COC)°C,Min.

250

250

250

250

 
  Top  
 
 
 
 
 
Home | Profile | Products | Clients |Contacts
Subcribe